Users Guide

• set tag — specify the tag assigned to redistributed routes.
set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, congure a lter.
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference command.
Parameters
value Enter a number as the LOCAL_PREF attribute value. The range is from 0 to 4294967295.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The set local-preference command changes the LOCAL_PREF attribute for routes meeting the route map
criteria. To change the LOCAL_PREF for all routes, use the bgp default local-preference command.
Related Commands
• bgp default local-preference — change the default LOCAL_PREF attribute for all routes.
set metric
To assign a new metric to redistributed routes, congure a lter.
Syntax
set metric [+ | -] metric-value
258 Access Control Lists (ACL)