Users Guide

The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specied rules in the ACL, the trac on the
interface/ VLAN members or Port-channel members will be permitted or denied.
clear counters mac access-group
Clear counters for all or a specic MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a congured MAC access list.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
mac access-group
Apply a MAC ACL to trac entering or exiting an interface. You can apply a MAC ACL on a physical, port-channel, or VLAN interface.
Syntax
mac access-group access-list-name {in [vlan vlan-range] | out}
To delete a MAC access-group, use the no mac access-group mac-list-name command.
Parameters
access-list-name Enter the name of a congured MAC access list, up to 140 characters.
NOTE: This option is available only with the keyword in option.
vlan vlan-range (OPTIONAL) Enter the keyword vlan and then enter a range of VLANs. The range is
from 1 to 4094 (you can use IDs 1 to 4094).
Access Control Lists (ACL) 219