Users Guide
This le contains hostnames and usernames, for which hosts and users, rhost-authentication can be allowed.
NOTE: For rhostfile and pub-key-file, the administrator must FTP the le to the
switch.
ip ssh rsa-authentication (Cong)
Enable RSA authentication for the SSHv2 server.
Syntax
ip ssh rsa-authentication enable
To disable RSA authentication, use the no ip ssh rsa-authentication enable command.
Parameters
enable Enter the keyword enable to enable RSA authentication for the SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-
authentication my-authorized-keys device://filename command).
Security 1431