Users Guide

267 bcmSTACK 117927936 0 0 0 0 0
266 bcmRX 117927936 0 0 0 0 0
265 bcmLINK.0 117927936 0 0 0 0 0
!----------- output truncated --------------!
Dell#
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-
unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display software pipe
and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the interface
information to display interface control block information for that interface:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
stack-unit unit-ID Enter the keyword stack-unit then the stack member number to display IFM
information for that unit.
trace-ags Enter the keyword trace-flags to display IFM information for internal trace ags.
Defaults None.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Control and Monitoring 143