Users Guide

Version Description
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
This command species the le used for the host-based authentication. The creates/ le overwrites the
flash://ADMIN_DIR/ssh/knownhosts le and deletes the user-specied le. Even though this command is
a global conguration command, it does not appear in the running conguration because you only need to run this
command once.
The le contains the OpenSSH-compatible public keys of the host for which host-based authentication is allowed.
An example known host le format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t
ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds= ashwani@poclab4
NOTE: For rhostfile and pub-key-file, the administrator must FTP the le to the
chassis.
Example
Dell# conf
Dell(conf)# ip ssh pub-key-file flash://knownhosts
Dell(conf)#
Related Commands
• show ip ssh client-pub-keys — displays the client-public keys used for the host-based authentication.
ip ssh rekey
Congures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key during an SSH session.
Syntax
ip ssh rekey [time rekey-interval] [volume rekey-limit]
To reset to the default, use no ip ssh rekey [time rekey-interval] [volume rekey-limit]
command.
Parameters
time minutes Enter the keywords time then the amount of time in minutes. The range is from 10 to
1440 minutes. The default is 60 minutes
volume rekey-
limit
Enter the keywords volume then the amount of volume in megabytes. The range is from 1
to 4096 to megabytes. The default is 1024 megabytes
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command Modes CONFIGURATION mode
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
Security 1429