Users Guide
• If 802.1X is disabled on the port, it is returned to the congured access VLAN.
• When the port is in the Force Authorized, Force Unauthorized, or Shutdown state, it is placed in the congured access VLAN.
• If an 802.1X port is authenticated and put in the RADIUS server assigned VLAN, any change to the port access VLAN conguration
does not take eect.
• The 802.1X with VLAN assignment feature is not supported on trunk ports, dynamic ports, or with dynamic-access port assignment
through a VLAN membership.
dot1x authentication (Conguration)
Enable dot1x globally; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on globally, use the no dot1x authentication command.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Related Commands
• dot1x authentication (Interface) — enable dot1x on an interface.
dot1x authentication (Interface)
Enable dot1x on an interface; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults Disabled.
Command Modes INTERFACE
1406 Security