Users Guide
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for the secret option and the MD5 password encryption. Extended the
name from 25 to 63 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information To view the dened user names, use the show running-config user command.
Related Commands
• password — species a password for users on terminal lines.
• show running-cong — views the current conguration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
aaa radius auth-method
Congure the authentication method to use with RADIUS for user access.
Syntax
aaa radius auth-method {pap | mschapv2}
To undo the RADIUS authentication method conguration, use the no aaa radius auth-method command.
Parameters
pap Enter the keyword pap to use the Password Authentication Protocol (PAP) for RADIUS
authentication. This protocol uses the username and password attributes in the access-
request message sent to the RADIUS server.
mschapv2 Enter the keyword mschapv2 to use the Microsoft Challenge-Handshake Authentication
Protocol (MS-CHAPv2) for RADIUS authentication. This protocol is considered to be
more secure than PAP and uses mutual authentication based on a random challenge and
challenge response.
Defaults PAP
Command Modes CONFIGURATION
1388 Security