Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1291

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

9.7(0.0) Introduced on the S6000-ON.

9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

Usage Information A color map outlines the codepoint mappings to the appropriate color mapping (green, yellow, red) for the trac.

The system uses this information use to handle the trac on the interface based on the trac priority and places it

into the appropriate shaping queue. You cannot delete a DSCP color map when it is congured on an interface. If

you do, all the DSCP values are set to green (low drop precedence). To delete the DSCP color map that is being

used by one or more interfaces, remove the DSCP map from each interface.

Example

Dell(conf)#qos dscp-color-map mymap

Related Commands

• qos dscp-color-map— associates the DSCP color map prole with an interface so that all IP packets received

on it is given a color based on that color map.

• dscp— sets the number of specic DSCP values for color map prole to yellow or red.

qos dscp-color-policy

Associates the DSCP color map prole with an interface so that all IP packets received on it is given a color based on that color map.

Syntax

dscp-color-policy color-map-profile-name

To remove a color policy map prole, use the no dscp-color-policy color-map-profile-name

command.

Parameters

color-map-prole-

name

Enter the color map prole name. The name can have a maximum of 32 characters.

Defaults None

Command Modes CONFIG-INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.