Users Guide
trust
Specify dynamic classication (DSCP) or dot1p to trust.
S3048–ON
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diserv Enter the keyword diffserv to specify trust of DSCP markings.
dot1p Enter the keyword dot1p to specify trust dot1p conguration.
fallback Enter the keyword fallback to classify packets according to their DSCP or dot1p value
as a secondary option in case no match occurs against the congured class maps.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added fallback to the E-Series.
8.2.1.0 Added dot1p to the C-Series and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added dot1p and IPv6 DSCP .
6.1.1.1 Introduced on the E-Series.
Usage Information
When you congure trust, matched bytes/packets counters are not incremented in the show qos
statistics command.
Dynamic mapping honors packets marked according to the standard denitions of DSCP. The following lists the
default mapping.
1290 Quality of Service (QoS)