Users Guide

Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 172.31.1.255, timeout is 2 seconds:
Reply to request 1 from 172.31.1.208 0 ms
Reply to request 1 from 172.31.1.216 0 ms
Reply to request 1 from 172.31.1.205 16 ms
::
Reply to request 5 from 172.31.1.209 0 ms
Reply to request 5 from 172.31.1.66 0 ms
Reply to request 5 from 172.31.1.87 0 ms
Dell#
Example (IPv6)
Dell# ping 100::1
Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds:
!!!!!
Success rate is 100.0 percent (5/5), round-trip min/avg/max = 0/0/0 (ms)
Dell#
reload
Reboot the system.
Syntax
reload [conditional nvram-cfg-change | no-confirm [discard-running] | dell-diag
| onie [install | uninstall | rescue]]
Parameters
conditional nvram-
cfg-change
(OPTIONAL) Reload into the Dell Networking Operating System (OS) if the condition is
true. A conguration change to the NVRAM requires a switch reload. To reload the
switch, select nvram-cfg-change.
no-conrm
[discard-running]
Reload the chassis without prompting for further conrmation.
dell-diag (OPTIONAL) Reload the system into the Dell diagnostics mode.
onie (OPTIONAL) Reload the system into the ONIE mode. You can also use one of the
following options to reload the system and enter the respective modes directly:
• install — enter the Install mode and install the networking OS
• uninstall — enter the Uninstall mode and uninstall the networking OS
•
rescue — enter the Rescue mode and access the le system
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0)
Added the optional dell-diag and onie parameters.
Introduced the no-confirm option.
9.8(1.0) Introduced on the Z9100–ON.
122 Control and Monitoring