Users Guide

To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identication number. The range is from 0 to 65535.
type Species one of the following type:
• rpm
• erpm
rpm Creates a remote port monitoring (rpm) session.
erpm Creates an encapsulated remote port monitoring (erpm) session.
set ip dscp Congures the Dierentiated Services Code Point (DSCP) value of the packets in the
Encapsulated Remote Switched Port Analyzer (ERSPAN) trac. To revert to the default
value, use the no form of this command.
dscp_value DSCP value of the packets in the ERSPAN trac. The range is from 0 to 63. The default
value is 0.
set ip ttl Congures the IP time-to-live (TTL) value of the Encapsulated Remote Switched Port
Analyzer (ERSPAN) trac. To revert to the default conguration, use the no form of this
command.
ttl_value IP TTL value of the ERSPAN trac. The range is from 1 to 255. The default value is 255.
drop Monitors only the dropped packets in the Ingress.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Added the drop parameter.
9.7(0.0) Introduced on the S6000-ON. Introduced the set ip dscp and set ip ttl
parameters.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
9.0.2.0 Introduced on the S6000.
9.0.2.0 Introduced on the MXL.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Port Monitoring 1215