Users Guide

Usage Information Dell Networking OS counts the SA messages originated by itself and those messages received from the MSDP
peers. When the total SA messages reach this limit, the subsequent SA messages are dropped (even if they pass
RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this command is applied, those SA
messages that are already in Dell Networking OS continue to be accepted. To enforce the limit in such situation,
use the clear ip msdp sa-cache command.
Related Commands
• ip msdp peer — configure the MSDP peer.
• clear ip msdp peer — clear the MSDP peer.
• show ip msdp — display the MSDP information.
ip msdp shutdown
Administratively shut down a configured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced
Multicast Source Discovery Protocol (MSDP) 983