Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

811

812

813

814

815

816

817

818

819

820

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for VRF.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.1 Introduced on the S4810.

8.4.2.1 Introduced on the S-Series.

Usage Information

NOTE: If a route has a mask greater than 64, no output is displayed and no output is displayed for

show ipv6 cam stack-unit unit-number port-set {0-1} ipv6-address, but an

equivalent /64 entry would be listed in the show ipv6 cam stack-unit unit-number port-

set {0-1}

output. Similarly, if there is more than one ECMP object with a destination route that has

a mask greater than 64, if the first 64 bits in the destination routes of the ECMP objects are the same,

only one route is installed in CAM even though multiple ECMP path entries exist.

NOTE: The self address is displayed in the neighbor portion for the show ipv6 cam stack-unit

unit-number port-set command.

show ipv6 control-plane icmp

Displays the status of the icmp control-plane setting for the error eate limit setting.

Syntax

show ipv6 control-plane icmp

Default 100

Command Modes EXEC