Users Guide

interface
tunnel
for all configured tunnels. For a specific tunnel, enter the tunnel
ID. The range is from 1 to 16383.
ip
for the current IP configuration
isis
for the current ISIS configuration
line
for the current line configuration
lldp
for the current LLDP configuration
load-balance
for the current port-channel load-balance configuration
logging
for the current logging configuration
mac
for the current MAC ACL configuration
mac-address-
table
for the current MAC configuration
management-
eis
for the current management EIS configuration
management-
route
for the current Management port forwarding configuration
mld
for the current MLD configuration
monitor
for the current Monitor configuration
mroute
for the current Mroutes configuration
msdp
for the current MSDP configuration
ntp
for the current NTP configuration
ospf
for the current OSPF configuration
pim
for the current PIM configuration
policy-map-
input
for the current input policy map configuration
policy-map-
output
for the current output policy map configuration
po-failover-
group
for the current port-channel failover-group configuration
prefix-list
for the current prefix-list configuration
privilege
for the current privilege configuration
qos-policy-
input
for the current input QoS policy configuration
qos-policy-
output
for the current output QoS policy configuration
radius
for the current RADIUS configuration
redirect-list
for the current redirect-list configuration
redundancy
for the current RPM redundancy configuration
resolve
for the current DNS configuration
rip
for the current RIP configuration
File Management 79