Users Guide

Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF.
NOTE: Use this attribute to start a BGP instance for either a specific address
family corresponding to the default VRF or an IPv4 address family
corresponding to a non-default VRF.
interface interface (OPTIONAL) Enter the following keywords and the interface information:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information.
• For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
ip ip-address mask (OPTIONAL) Enter the keyword ip then an IP address in the dotted decimal format.
Enter the optional IP address mask in the slash prefix format (/ x).
inspection Enter the keyword inspection with one of the following keywords to view ARP
entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
macaddress mac-
address mask
(OPTIONAL) Enter the keyword macaddress then a MAC address in nn:nn:nn:nn:nn:nn
format. Enter the optional MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries entered manually.
retries (OPTIONAL) Enter the keyword retries to show the number of ARP retries before a
20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP entries.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF and added usage information for the clear arp-cache
command.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
764 IPv4 Routing