Users Guide

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.5.1.0 Added support for 4-port 40G line cards on the E-Series.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Added support for 4094 VLANs on the E-Series (the prior limit was 2094).

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.3.1.0 Added the count option.

Example

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

Usage Information

To stop packets from flooding the user terminal when debugging is turned on, use the count option.

debug ip packet

View a log of IP packets sent and received.

Syntax

debug ip packet [access-group name] [count value] [interface]

To disable debugging, use the no debug ip packet [access-group name] [count value]

[interface] command.

IPv4 Routing 737