Users Guide

show interfaces eee
Display whether EEE is enabled on interfaces..
Syntax
show interfaces [interface—type [slot/port | slot/port-range]] eee
Parameters
interface-type Enter the interface information as TenGigabitEthernet followed by the slot and the
port number or range of port numbers.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S3048–ON.
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage Information
The show interfaces eee command displays whether EEE has been enabled and shows the status of all the
interfaces.
Use the show interfaces interface-type slot/port eee command to view the status of EEE on
the specified port.
Use the show interfaces interface-type slot/port-range eee command to view the status of
EEE on the specified range of ports.
Example
Example for all the interfaces:
Example for a specific interface:
Related Commands
• show interfaces — display information on a specific physical interface or virtual interface.
show interfaces eee statistics
Display the statistical details of Energy Efficient Ethernet (EEE).
Syntax
show interfaces [interface-type [slot/port | slot/port-range]] eee statistics
Parameters
interface-type Enter the interface information as GigabitEthernet or TenGigabitEthernet
followed by the slot and the port number or range of port numbers.
Defaults None
Command Modes
• EXEC
Interfaces 671