Users Guide

Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is removed
from the port that sends GVRP advertisements to this device, the port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you do not want the
interface.
Related Commands
• show gvrp — display the GVRP configuration including the registration.
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related Commands
• disable — globally disable GVRP.
576 GARP VLAN Registration (GVRP)