Users Guide

Version Description
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Related Commands
• show ip dhcp snooping — display the contents of the DHCP binding table.
IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-address
interface interface-type | interface-number lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use the [no] ipv6 dhcp
snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is leasing
the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
ipv6 ipv6-address Enter the keyword ipv6 then the IPv6 address that is leased to the client.
interface type Enter the keyword interface then the type of interface to which the host is
connected:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
interface number Enter the number of the interface.
lease value Enter the keyword lease then the amount of time the IPv6 address are leased. The
range is from 1 to 4294967295.
Defaults None
Command Modes
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
Dynamic Host Configuration Protocol (DHCP) 523