Users Guide

number Enter all to get information for all the stack-units or enter the stack-unit number to get
information for a specific stack-unit.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced.
Usage Information
This command applies to both IPv4 and IPv6 CAM Profiles, but is best used when verifying QoS optimization for
IPv6 ACLs.
QoS Optimization for IPv6 ACLs does not impact the CAM usage for applying a policy on a single (or the first of
several) interfaces. It is most useful when a policy is applied across multiple interfaces; it can reduce the impact to
CAM usage across subsequent interfaces.
The following describes the test cam-usage command shown in the following example.
Term Explanation
Stack-Unit
Lists the stack unit or units that are checked. Entering all shows the status for all stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all
shows the status for stack-units and port-pipes in the chassis. The port set value is from
0 to 0.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that profile.
Estimated CAM per
Port
Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example
Dell# test cam-usage service-policy input In stack-unit all
Stack-Unit|Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
----------------------------------------------------------------------------
1 | 0 | IPv4Flow | 102 | 0| Allowed
1 | 0 | IPv4Flow | 102 | 0| Allowed
Dell#
!
Dell# test cam-usage service-policy input In stack-unit 1 port-set 0
Content Addressable Memory (CAM) 465