Users Guide

VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 0
Dell#
show cam-usage
Display Layer 2, Layer 3, ACL, or all CAM usage statistics.
Syntax
show cam-usage [acl | router | switch]
Parameters
acl (OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM usage.
router (OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
switch (OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.11.0.0 The show cam-usage command is updated to display ECMP count information.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z9000.
Example
Example (show
cam-usage router)
test cam-usage
Verify that enough CAM space is available for the IPv6 ACLs you have created.
Syntax
test cam-usage service-policy input input policy name stack-unit {number | all}
Parameters
policy-map name Enter the name of the policy-map to verify. Maximum is 32 characters.
464 Content Addressable Memory (CAM)