Users Guide

Version Description
7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
distance bgp
Configure three administrative distances for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance Enter a number to assign to routes learned from a neighbor external to the AS. The range
is from 1 to 255. The default is 20.
internal-distance Enter a number to assign to routes learned from a router within the AS. The range is from
1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks listed in the network
command. The range is from 1 to 255. The default is 200.
Defaults
• external-distance = 20
• internal-distance = 200
• local-distance = 200
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
CAUTION: Dell Networking recommends not changing the administrative distance of internal routes.
Changing the administrative distances may cause routing table inconsistencies.
Border Gateway Protocol 445