Users Guide

When you change the path selection from Deterministic to Non-Deterministic, the path selection for the existing
paths remains Deterministic until you enter the clear ip bgp command to clear existing paths.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax
bgp recursive-bgp-next-hop
To disable next-hop resolution, use the no bgp recursive-bgp-next-hop command.
Defaults Enabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information
This command is a knob to disable BGP next-hop resolution using BGP learned routes. During the next-hop
resolution, only the first route that the next-hop resolves through is verified for the route’s protocol source and is
checked if the route is learned from BGP or not.
The clear ip bgp command is required for this command to take effect and to keep the BGP database
consistent. Execute the clear ip bgp command right after executing this command.
Related Commands
• clear ip bgp — clear the ip bgp.
356 Border Gateway Protocol