Users Guide

Parameters
group-name
Display only the ACL VLAN group that is specified. The maximum group name is 140
characters.
Default None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Examples The following sample output shows the line-by-line style display when using the show running-config acl-
vlan-group option. Note that no group or access list names are truncated
Dell #show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show running-config acl-vlan-group Test
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#
acl-vlan-group
Create an ACL VLAN group.
Syntax
acl-vlan-group {group name}
To remove an ACL VLAN group, use the no acl-vlan-group {group name} command.
Parameters
group-name Specify the name of the ACL VLAN group. The name can contain a maximum 140
characters.
Default No default behavior or values
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
318 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)