Users Guide

or ipv6), the ACL processes either IPv4 or IPv6 rules, but not both. Using this configuration, you can set up two
different types of access classes with each class processing either IPv4 or IPv6 rules separately.
However, if you already have configured generic IP ACL on a terminal line, then you cannot further apply IPv4 or
IPv6 specific filtering on top of this configuration. Because, both IPv4 and IPv6 access classes are already
configured on this terminal line. Before applying either IPv4 or IPv6 filtering, first undo the generic configuration
using the
no access-class access-list-name command.
Similarly, if you have configured either IPv4 or IPv6 specific filtering on a terminal line, you cannot apply generic IP
ACLs on top of this configuration. Before applying the generic ACL configuration, first undo the existing
configuration using the no access-class access-list-name [ipv4 | ipv6] command.
clear counters ip access-group
Erase all counters maintained for access lists.
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up
to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Access Control Lists (ACL) 185