Users Guide

Version Description
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
Dell# show ip vrf
VRF-Name VRF-ID Interfaces
fault 0 Gi 1/1-13,18-47,
Te 1/49,50,51,52,
Ma 1/1,
Ma 2/1,
Ma 3/1,
Ma 4/1,
Ma 5/1,
Ma 6/1,
Nu 0,
Vl 1
test1 1 Gi 1/14,16-17
test2 2 Gi 1/15
management 64
Dell# show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Gi 1/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage Information This command displays information from the running-config corresponding to either a specific VRF or all the VRFs
in the system.
Virtual Routing and Forwarding (VRF) 1641