Users Guide

To import leaked routes from another VRF, use the same ASN number that is specified as
the export route target at the source VRF.
route-map-name Enter the name of the route-map to filter the imported routes.
NOTE: Use the route-map attribute while importing routes from the global
RTM. Route-maps allow you to filter routes at the import end based on the
matching criteria that you define in the route-map.
Command Modes
• CONFIGURATION
• VRF mode
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage Information It is possible to configure multiple import conditions per VRF depending on the exporting VRF.
The export-target and import-target support only the match protocol and match prefix-list options. Other options
that are configured in the route-maps are ignored.
Related Commands
• ip route-export – exports routes to another VRF.
ipv6 route-export
Enables route leaking between VRFs. This command exports or shares IPv6 routes corresponding to one VRF with other nondefault VRFs.
Syntax
ipv6 route-export tag [route-map-name]
Parameters
route-export Enter the keywords route-export to leak or share routes between VRFs.
tag Enter a tag (ASN number) as the export route target to expose routes to other VRFs.
This tag acts as an identifier for exported routes. Use this identifier while importing these
routes into another nondefault VRF.
route-map-name (Optional) Enter the name of the route-map to filter the exported routes. You can leak
global routes to be made available to VRFs. As the global RTM usually contains a large
pool of routes, when the destination VRF imports global routes, these routes are
duplicated into the VRF's RTM. It is mandatory to use route-maps to filter out leaked
routes while sharing global routes with VRFs.
Defaults N/A
Virtual Routing and Forwarding (VRF) 1635