Users Guide

start-day Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to time day month year.
start-year Enter a four-digit number as the year. The range is from 1993 to 2035.
start-time Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example,
17:15 is 5:15 pm.
end-day Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to time day month year.
end-month Enter the name of one of the 12 months in English. You can enter the name of a day to
change the order of the display to time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example,
17:15 is 5:15 pm.
end-year Enter a four-digit number as the year. The range is from 1993 to 2035.
offset (OPTIONAL) Enter the number of minutes to add during the summer-time period. The
range is from 1 to1440. The default is 60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related Commands
• clock summer-time recurring — sets a date (and time zone) on which to convert the switch to daylight saving
time each year.
• show clock — displays the current clock settings.
1582 System Time and Date