Users Guide

terminal length
Configure the number of lines displayed on the terminal screen.
Syntax
terminal length screen-length
Parameters
screen-length Enter a number of lines. Entering zero causes the terminal to display without pausing. The
range is from 0 to 512.
Defaults 24 lines
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
traceroute
View a packet’s path to a specific device.
Syntax
traceroute {host | vrf instance | ip-address | ipv6-address}
Parameters
host Enter the name of device.
vrf instance (Optional) E-Series Only: Enter the keyword vrf then the VRF Instance name.
ip-address Enter the IP address of the device in dotted decimal format.
150 Control and Monitoring