Users Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The following example configures a community named public that is mapped to the security named guestuser with
Read Only (ro) permissions.
The security-name parameter maps the community string to an SNMPv3 user/security name as defined by
the community MIB.
If a community string is configured without a security-name (for example, snmp-server community
public ro), the community is mapped to a default security-name/group:
• v1v2creadu / v1v2creadg — maps to a community with ro (read-only) permissions.
• v1v2cwriteu/ v1v2cwriteg — maps to a community with rw (read-write) permissions.
The community-name parameter indexes this command.
If you do not configure the snmp-server community command, you cannot query SNMP data. Only Standard
IPv4 ACL and IPv6 ACL is supported in the optional access-list-name.
The command options ipv6, security-name, and access-list-name are recursive. In other words, each
option can, in turn, accept any of the three options as a sub-option, and each of those sub-options can accept any
of the three sub-options as a sub-option, and so forth. The second Example shows the creation of a standard IPv4
ACL called snmp-ro-acl and then assigning it to the SNMP community guest.
NOTE: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP and ICMP rules are not valid
for SNMP. In IPv6 ACLs, port rules are not valid for SNMP.
Example
Dell# config
Dell(conf)# snmp-server community public ro
Dell(conf)# snmp-server community guest ro security-name guestuser
Dell(conf)#
Example
Dell(conf)# ip access-list standard snmp-ro-acl
Dell(config-std-nacl)#seq 5 permit host 10.10.10.224
1478 Simple Network Management Protocol (SNMP) and Syslog