Users Guide

• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm.
• hmac-sha1: Force ssh to use hmac-sha1 HMAC algorithm.
• hmac-sha1-96 : Force ssh to use hmac-sha1-96 HMAC algorithm.
• hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword -p then the port number. The range is from 1 to 65535.
The default is 22.
-v {1 | 2} (OPTIONAL) Enter the keyword -v then the SSH version 1 or 2. The default is the
version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Added support for the following ciphers and HMAC alogorithms on the Z9000, S6000,
S4820T, S4820T. S6000–ON.
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
• hmac-sha2-256
• hmac-sha2-256-96
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Added support for the -c and -m parameters on the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Added IPv6 support. Introduced on the C-Series.
Security 1437