Users Guide

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-
authentication my-authorized-keys device://filename command).
ip ssh server
Configure an SSH server. SSH server is enabled by default.
Syntax
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-
exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}]
To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable |
port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1
| 2}] command.
Parameters
enable Enter the key word enable to start the SSH server.
ciphers cipher-list Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH
server supports. The following ciphers are available.
• 3des-cbc
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
1426 Security