Users Guide

ipv4-address | ipv6-
address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the RADIUS server
host.
auth-port port-
number
(OPTIONAL) Enter the keywords auth-port then a number as the port number. The
range is from zero (0) to 65535. The default port-number is 1812.
retransmit retries (OPTIONAL) Enter the keyword retransmit then a number as the number of
attempts. This parameter overwrites the radius-server retransmit command.
The range is from zero (0) to 100. The default is
3 attempts.
timeout seconds (OPTIONAL) Enter the keyword timeout then the seconds the time interval the switch
waits for a reply from the RADIUS server. This parameter overwrites the radius-
server timeout
command. The range is from 0 to 1000. The default is 5 seconds.
key [encryption-
type] key
(OPTIONAL) Enter the keyword key then an optional encryption-type and a string up to
42 characters long as the authentication key. The RADIUS host server uses this
authentication key and the RADIUS daemon operating on this switch.
For the encryption-type, enter either zero (0) or 7 as the encryption type for the key
entered. The options are:
• 0 is the default and means the password is not encrypted and stored as clear text.
• 7 means that the password is encrypted and hidden.
Configure this parameter last because leading spaces are ignored.
Defaults Not configured.
Command Modes
• RADIUS SERVER GROUP
• CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Included a prompt to force the users to re-authenticate when there is a change in the
RADIUS server list.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Security 1387