Users Guide

access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Related Commands
• line — applies an authentication method list to the designated terminal lines.
• ip access-list standard — names (or selects) a standard access list to filter based on the IP address.
• ip access-list extended — names (or selects) an extended access list based on the IP addresses or protocols.
aaa reauthenticate enable
Enable re-authentication of user whenever there is a change in the authenticators.
Syntax
aaa reauthenticate enable
To disable the re-authentication option, use the no aaa reauthenticate enable command.
Defaults Disabled
1368 Security