Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Added support for RADIUS.
Usage Information
Certain TACACS+ servers do not authenticate the device if you use the aaa authorization commands
level default local tacacs+ command. To resolve the issue, use the aaa authorization
commands
level default tacacs+ local command.
aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no aaa authorization
config-commands command.
Defaults Enabled when you configure aaa authorization commands command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information By default, the aaa authorization commands command configures the system to check both EXEC level
and CONFIGURATION level commands. Use the command no aaa authorization config-commands to
enable only EXEC-level command checking.
1360 Security