Users Guide
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS
Command Line Reference Guide.
Version Description
9.11(0.0) Updated the show qos statistics egress—queue output to reflect per queue per port
tx and drop rates.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Added the egress-queue keyword.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.1 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example of show
qos statistics
egress—queue
with per queue per
port tx and drop
rates
Dell#show qos statistics egress-queue gigabitethernet 1/10
Interface Gi 1/10
Unicast/Multicast Egress Queue Statistics
Queue# Q# Type TxPkts TxPkts/s TxBytes TxBytes/s DroppedPkts DroppedPkts/s DroppedBytes DroppedBytes/s
-------------------------------------------------------------------------------------------------------------------------
0 UCAST 2005191759 6102 1503896312254 4519906 0 0 0 0
1 UCAST 0 0 0 0 0 0 0 0
2 UCAST 0 0 0 0 0 0 0 0
3 UCAST 0 0 0 0 0 0 0 0
4 UCAST 0 0 0 0 0 0 0 0
5 UCAST 0 0 0 0 0 0 0 0
6 UCAST 0 0 0 0 0 0 0 0
7 UCAST 322323 0 40697472 97 0 0 0 0
8 MCAST 0 0 0 0 0 0 0 0
9 MCAST 0 0 0 0 0 0 0 0
10 MCAST 0 0 0 0 0 0 0 0
11 MCAST 0 0 0 0 0 0 0 0
12 MCAST 0 0 0 0 0 0 0 0
Dell#
Usage Information
In a dual homing setup, you can use this command only from the primary VLT peer.
The following list describes output of the show qos statistics command in the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you configure trust , matched packet counters are not incremented in this field.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you configure trust , matched byte counters are not incremented in this field.
• Dropped Pkts — The total of the number of packets dropped for green, yellow and out-of-profile.
1280 Quality of Service (QoS)