Users Guide

service-policy output
Apply an output policy map to the selected interface.
S3048–ON
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output policy-map-
name command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum). You
can identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A
policy map attached to an interface can be modified.
Related Commands
• policy-map-output — creates an output policy map.
Quality of Service (QoS) 1269