Users Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series.
E-Series legacy
command
Related Commands
• show ip pim tib — show the PIM tree information base.
ip mroute
Assign a static mroute.
Syntax
ip mroute [vrf vrf-name] destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}} [distance]
To delete a specific static mroute, use the no ip mroute [vrf vrf-name] destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address |
tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute [vrf vrf-name]destination
mask command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to assign a static
mroute to that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default
VRF.
destination Enter the IP address in dotted decimal format of the destination device.
mask Enter the mask in slash prefix formation ( /x ) or in dotted decimal format.
null 0 (OPTIONAL) Enter the keyword null then zero (0).
[protocol [process-
id | tag] ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted decimal format of the
reverse path forwarding (RPF) neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the IP address in dotted decimal
format of the RPF neighbor. the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format
of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF neighbor.
static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor.
1006 Multicast