Reference Guide

Supported
Releases
10.4.0E(R1) or later
ip vrf management
Configures the management VRF instance.
Syntax
ip vrf management
Parameters None
Default Not configured
Command Mode CONFIGURATION
Usage
Information
Enter the ip vrf management command only in non-transaction-based configuration mode. Do not
use transaction-based mode. The no version of this command removes the management VRF instance
configuration.
Example
OS10(config)# ip vrf management
OS10(conf-vrf)#
Supported
Releases
10.4.0E(R1) or later
show hosts vrf
Displays the host table in the management or non-default VRF instance.
Syntax
show hosts vrf {management | vrf-name}
Parameters
● management—Enter the keyword management to display the host table in the management VRF instance.
● vrf-name—Enter the name of the non-default VRF instance to display the host table in that VRF instance.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show hosts vrf management
Default Domain Name : dell.com
Domain List : abc.com xyz.net
Name Servers : 10.16.126.1
===================================================================================
Static Host to IP mapping Table
===================================================================================
Host IP-Address
-----------------------------------------------------------------------------------
google.com
172.217.160.142
yahoo.com
98.139.180.180
Supported
Releases
10.4.0E(R1) or later
show ip vrf
Displays the VRF instance information.
Syntax
show ip vrf [management | vrf-name]
Layer 3 267