Administrator Guide
redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-
value] [metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate
parameters.
Parameters
AS number
Enter a number that corresponds to the autonomous system number. The range is
from 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes
only. This setting is the default.
metric
metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
● external
● internal
route-map
map-
name
map-name is an identifier for a configured route map. The route map filters
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a
keyword, but fail to list route map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
848 Intermediate System to Intermediate System (IS-IS)