Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.

file-url

Enter the following location keywords and information to upgrade using an Dell EMC

Networking OS image other than the one currently running:

● To specify an Dell EMC Networking OS image on the internal flash, enter

flash:// file-path/filename.

● To specify an Dell EMC Networking OS image on an FTP server, enter ftp://

user:password@hostip/filepath.

● To specify an Dell EMC Networking OS image on the external flash, enter

slot0://file-path/filename.

● To copy a file on a TFTP server, enter tftp://hostip/filepath/

filename.

where hostip is either an IPv4 dotted decimal address or an IPv6 URI [x:x:x:x::x]

format address.

Defaults none

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0(0.0) Added support for IPv6 for the file-url parameter.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage

Information

RFC 3986 specifies that IPv6 host addresses in a uniform resource identifier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum flexibility this command accepts IPv6 host addresses with or

without the square brackets.

Reload Dell EMC Networking OS after executing this command. To copy Dell EMC Networking OS from

the management unit to one or more stack members, use the upgrade system stack-unit (S-

Series stack member) command.

Example

DellEMC# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/

filepath)

scp: Copy from remote file system (scp://userid:password@hostip/

filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

DellEMC# upgrade system ftp://username:password@10.11.1.1/FTOS-

SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

82 File Management