Administrator Guide

○ hardware forwarding-table mode {scaled-l2-switch | scaled-l3-routes
| scaled-l3-hosts}
○ cam-ipv6 extended-prefix {1024 | 2048 | 3072}
○ ip ecmp-group maximum-paths 2-64
● ACL CAM carving related CLIs:
○ cam-acl cli
○ cam-acl-vlan cli
○ cam-acl-egress cli
○ cam-sharing
● Feature keyword CLIs:
○ feature udf-acl
○ feature aclrange
○ feature ipv6acloptimized
○ feature acloptimized
Example
DellEMC# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51.
Received block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.......
...........!!!!!!!!!!!!!!!!!!!!!!!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Image upgraded to all
DellEMC#
The following example shows that the system prompts for the hash value of the OS image with the OS
image verification feature enabled:
Dell# upgrade system tftp://10.16.127.35/FTOS-SE-9.11.0.1 A:
Hash Value: e42e2548783c2d5db239ea2fa9de4232
!!!!!!!!!!!!!!...
HTTP Copy via CLI
Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip
field).
Syntax
copy http://10.16.206.77/sample_file flash://sample_filecopy flash://
sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.
Parameters
copy http:
flash:
Address or name of remote host []: 10.16.206.77
Port number of the server [80]:
Source file name []: sample_file
User name to login remote host: x
Password to login remote host:
Destination file name [sample_file]:
Defaults None.
68 File Management