Administrator Guide

Related
Commands
● mac learning-limit — allow aging of MACs even though a learning-limit is configured or disallow station
move on learned MACs.
clear counters eee
Clear the counters for EEE on all copper ports or specific ports.
Syntax
clear counters [interface—type [slot/port | slot/port-range]] eee
Parameters
interface-type Enter the interface information as TenGigabitEthernet followed by the slot
and the port number or range of port numbers.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage
Information
Use the clear counters eee command to clear counters for EEE on all the copper ports.
Use the clear counters interface-type slot/port eee command to clear the counters for
EEE on the specified port.
Use the clear counters interface-type slot/port-range eee to clear the counters for
EEE on the specified range of ports.
Example
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and the interface information to
clear counters from a specified interface:
● For a Port Channel interface, enter the keywords port-channel then a
number.
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Defaults Without an interface specified, the command clears all interface dampening counters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
Interfaces 613