Administrator Guide

● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Included the FEC BER details in the output for 25 and 50GG interfaces of the
S5048–ON.
9.12(1.0) Introduced on the S5048F–ON.
9.11(0.0)
Included the FEC BER details in the output for 100G interfaces of S6100–ON and
Z9100–ON .
Included FCS Error Ratio in the output for all interfaces of S6000, S6000–ON,
S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Removed the keywords stack-unit. Introduced on the Z9500.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modified the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Example
displaying
internal drops
DellEMC# show hardware drops interface gigabitethernet 2/1
Drops in Interface Gi 2/1:
--- Ingress Drops ---
Ingress Drops : 0
IBP CBP Full Drops : 0
PortSTPnotFwd Drops : 0
IPv4 L3 Discards : 0
Policy Discards : 0
Packets dropped by FP : 0
(L2+L3) Drops : 0
Port bitmap zero Drops : 0
500 Debugging and Diagnostics