Administrator Guide

0 - 0 0
1 - 0 0
2 - 0 0
3 7 0 0
4 6 0 0
5 4 0 0
6 3 0 0
7 0-2,5 0 0
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow stack-unit id port-set number [counters]
Parameters
stack-unit id Enter the keywords stack-unit to select a stack member ID.
port-set number
[counters]
Enter the keywords port-set with a port-pipe number.
(OPTIONAL) Enter the keyword counters for the specified port-pipe.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
DellEMC# show hardware system-flow stack-unit 1 port-set 0 counters
-----------------------------------------------------------
EntryId Description #HITS
-----------------------------------------------------------
2048 STP BPDU Redirects 0
2047 LLDP BPDU Redirects 0
2045 LACP traffic Redirects 0
2044 GVRP traffic Redirects 0
2043 ARP Reply Redirects 0
2042 802.1x frames Redirects 0
2041 VRRP frames Redirects 0
2040 GRAT ARP 0
2039 DROP Cases 0
Debugging and Diagnostics 497