Administrator Guide

no-export Enter the keywords no-export to drop all routes containing the well-known
community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute must not be
advertised outside a BGP confederation boundary.
none Enter the keyword none to remove the community attribute from routes meeting
the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the communities to already
existing communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
● match community — redistribute routes that match the COMMUNITY attribute.
● show ip bgp community — display BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 |
level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes to the OSPF
backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
258 Access Control Lists (ACL)