Administrator Guide

arp additional-refresh
Perform additional ARP refresh on the VLTi (ICL).
Syntax
arp additional-refresh
To disable additional ARP refresh on VLTi, use the no arp additional-refresh command.
Defaults Enabled
Command Modes VLT DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(2.7) Introduced on all platforms.
Usage
Information
To disable additional ARP refresh on VLTi, use the no arp additional-refresh command. To
reenable additional ARP refresh on VLTi, use the arp additional-refresh command.
back-up destination
Configure the IPv4 or IPv6 address of the management interface on the remote VLT peer used as the VLT backup link endpoint
for sending out-of-band (OOB) hello messages.
Syntax
back-up destination {[ipv4–address] | [ipv6 ipv6–address] [interval
seconds] vrf [management vrf-name | vrf-name]}
Parameters
ipv4–address Enter the IPv4 address of the backup destination.
ipv6 Enter the keyword ipv6 then an IPv6 address in the X:X:X:X::X format.
interval seconds Enter the keyword interval to specify the time interval to send hello messages.
The range is from 1 to 5 seconds. The default is 1 second.
vrf management
vrf-name
(OPTIONAL) Configures the management VRF instance for the backup IPv4 or
IPv6 address.
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF.
Defaults 1 second
Command Modes VLT DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
1640 Virtual Link Trunking (VLT)