Administrator Guide

Parameters
bgp Enter the keyword bgp to leak or share routes corresponding to the BGP protocol.
isis Enter the keyword isis to leak or share routes corresponding to the ISIS protocol.
ospf Enter the keyword ospf to leak or share routes corresponding to the OSPF
protocol.
connected Enter the keyword connected to leak or share connected routes corresponding
to the VRF.
static Enter the keyword static to leak or share static routes corresponding to the
VRF.
Command Modes ROUTE MAP MODE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage
Information
Specify the matching criteria only after defining a route-map. Before using this command, you must enter
Route Map mode using the route-map route-map-name command. The match criteria that you
specify is associated with the route-map that you define.
The export-target and import-target options support only the match protocol and match prefix-list
options. Other options that you configure in the route-maps are ignored.
Related
Commands
● ipv6 route-import – imports IPv6 routes from another VRF.
redistribute
Redistributes leaked or exported routes corresponding to specific protocols.
Syntax
redistribute {imported-bgp | import-ospf | import-isis}
Parameters
imported-bgp Enter the keywords imported-bgp to redistribute leaked routes that are learned
using the BGP protocol.
imported-ospf Enter the keywords imported-ospf to redistribute leaked routes that are
learned using the OSPF protocol.
imported-isis Enter the keywords imported-isis to redistribute leaked routes that are
learned using the ISIS protocol.
route-map Enter the name of the route-map to specify the filtering criteria for imported
routes.
Command Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
1628 Virtual Routing and Forwarding (VRF)