Administrator Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Added the tunnel source anylocal command.
9.3(0.0) Introduced on the S4810, S4820T, S6000 and Z9000.
Usage
Information
Added an optional keyword “anylocal” to the tunnel source command. The anylocal argument can be
used in place of the ip address or interface, but only with the multipoint receive-only mode tunnels. The
tunnel source anylocal command allows the multipoint receive-only tunnel to decapsulate tunnel
packets addressed to any IPv4 or IPv6 (depending on the tunnel mode) address configured on the switch
that is operationally Up.
1600 Tunneling