Administrator Guide

FPGA IMAGE INFORMATION :
---------------------------------------------------------------------
Card FPGA Name Version
stack-unit 1 S3048-ON SYSTEM CPLD 9
stack-unit 1 S3048-ON MODULE CPLD 7
----------------------------------- show revision
-------------------------------
-- Stack unit 1 --
S3048-ON SYSTEM CPLD : 9
S3048-ON MODULE CPLD : 7
------------------------------------ show clock
-------------------------------
12:20:06.341 UTC Thu Jul 5 2018
<output truncated for brevity>
Example(show
tech-support
stack-unit)
DellEMC#show tech-support page
----------------------------------- show version
-------------------------------
Dell EMC Real Time Operating System Software
Dell EMC Operating System Version: 2.0
Dell EMC Application Software Version: 9.14(0.0)
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
Build Time: Tue Jun 5 07:33:50 2018
Build Path: /neteng/jraghava/IMAINYFIN/SW/SRC
Dell EMC Networking OS uptime is 1 day(s), 0 hour(s), 41 minute(s)
System image file is "users/jraghava/S3000CR"
System Type: S3048-ON
Control Processor: Intel Rangeley with 2 Gbytes (2127654912 bytes) of
memory, core(s) 2.
8G bytes of boot flash memory.
1 52-port GE/TE (SG-ON)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
<output truncated for brevity>
ssh-peer-stack-unit
Open an SSH connection to the peer stack-unit.
Syntax
ssh-peer-stack-unit [-l username]
Parameters
-l username (OPTIONAL) Enter the keyword -l then your user name. The default is the user
name associated with the terminal.
Defaults Not configured.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Control and Monitoring 151